Tips for the installation of industrial switchboards

Choosing the right location for the installation of industrial switchboards is the first step to ensure a good result and minimise future problems. In order to find a good location, two main aspects must be taken into account: it must be easily accessible for maintenance personnel, and it must also offer protection against possible physical and environmental damage.

To achieve this second point, it is essential to ensure that the area where the switchgear is to be installed is clean and free of obstacles that could put the person handling the switchgear at risk. It is important that the surface is flat and capable of supporting the weight of the panel.

Once it has been decided where the electrical panel is to be installed, it is time to start with the installation of industrial switchboards. It is very important to follow the manufacturer’s specifications and follow them to the letter. It is very important to use the right brackets and to fix the panel correctly to avoid subsequent vibration or displacement that could affect its operation.

When connecting the cables, the wiring diagrams supplied must be followed and, above all, the correct wiring must be used. The length of the cable and its calibre are very important details to avoid future overheating and to guarantee the correct distribution of electricity.

At Top Cable we have a wide range of panels wire cables to be able to adapt in the best way to the characteristics of the installation. From flexible cable for the most complicated layouts, to cables with the maximum CPR regulation to offer maximum safety in the event of fire.

Before finalising the installation of industrial switchboards, it is necessary to make sure of some aspects that are of the utmost importance to guarantee the good maintenance of the installation. The first step, although it may seem obvious, is to make sure that the installation is working properly. This includes continuity tests, insulation resistance tests and checks on the functioning of protective devices.

It is very important to document the entire installation process, including wiring diagrams, test results and any other relevant information. To facilitate future maintenance work, each component of the installation and each cable must be clearly labelled.

In order to ensure maximum safety for personnel and equipment handling the installation, the installation must comply with all local and national electrical safety regulations. This is the only way to comply with legal regulations.